GSGI - Beakers

Beakers moulded in Polypropylene have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spour.

Material :- Polypropylene

Item No.

Particulars (in ml)

GSGI/PL/11101

50

GSGI/PL/11102

100

GSGI/PL/11104

250

GSGI/PL/11105

500

GSGI/PL/11106

1000

GSGI/PL/11107

2000

top

GSGI – Beakers (Euro Design)

Material :- Polypropylene

 

Item No.

Particulars (in ml)

GSGI/PL/11110

25

GSGI/PL/11111

50

GSGI/PL/11112

100

GSGI/PL/11113

250

GSGI/PL/11114

500

GSGI/PL/11115

1000

GSGI/PL/11116

2000

GSGI/PL/11117

5000

Material :- TPX

GSGI/PL/11201

50

GSGI/PL/11202

100

GSGI/PL/11203

250

GSGI/PL/11204

500

GSGI/PL/11205

1000

 

 

top

GSGI - Burette

This burette has a transparent acrylic body and a leakproof stopcock made fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give a maximum accuracy. Acrylic body is unaffected by dilute mineral acids and bases except Hydrofolic acid and Ammonium Hydroxide. The pH range from 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases.

 

Material :- Polymethyl Methacylate/TPX

 

Item No.

Particulars (in ml)

GSGI/PL/11501

25

GSGI/PL/11502

50

GSGI/PL/11503

100

 

 

top

GSGI – Pipette Pump

GSGI presents a fast release pipetting device for precise pipetting and zip quick empyting. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be  pushed in for zip-quick empyting. The moduled chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids and alkalies and can be easily disassembled for thorough cleaning.

Material :- Acrylonitrile Butadine Styrene

 

Item No.

Particulars (in ml)

GSGI/PL/20001

2

GSGI/PL/20002

10

GSGI/PL/20003

25

 

top

GSGI – Dropping Bottles

Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense

small uniform drops of liquids when pressed lightly.

 

Material :- Low Density Polyethylene

 

Item No.

Particulars (in ml)

GSGI/PL/22101

60

GSGI/PL/22102

125

 

top

GSGI – Reagent Bottles (Narrow Mouth)

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and arc unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

 

Material : Low Density Polyethylene and Polypropylene

 

 

Item No.

Item No.

Particulars (in ml)

GSGI/PL/33301

GSGI/PL/33401

60

GSGI/PL/33302

GSGI/PL/33402

125

GSGI/PL/33303

GSGI/PL/33403

250

GSGI/PL/33304

GSGI/PL/33404

500

GSGI/PL/33305

GSGI/PL/33405

1000

 

 

top

GSGI – Reagent Bottles (Wide Mouth)

These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact c1aritc These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and arc unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Material : Low Density Polyethylene and  Polypropylene

 

Item No.

Item No.

Particulars (in ml)

GSGI/PL/33306

GSGI/PL/33406

60

GSGI/PL/33307

GSGI/PL/33407

125

GSGI/PL/33308

GSGI/PL/33408

250

GSGI/PL/33309

GSGI/PL/33409

500

GSGI/PL/33310

GSGI/PL/33410

1000

 

 

 

GSGI – Narrow Mouth Bottle

This autoclavable bottle, made of polypropylene,. can be used for storing & transferring chemicals and other reagents safe & sound.

 

Material : Polypropylene

 

Item No.