Item Code GSGI/PTFE/001 to GSGI/PTFE/071 

Item Code : - GSGI/PTFE/001                                                              

PTFE BEAKERS
MADE OF PTFE. Griffin low, Form .... broad spout for easy Pouring .... all popular sizes ..... Smooth surfaces non - contaminating unbreakable. Easy to clean. We can also manufacture tall for Philips type and without spout. 
Capacity (in ml) : - 25, 50, 100, 150, 200, 250, 300, 400, 500, 1000, 2000, 3000, 5000, 10000 ml.

Item Code : - GI/PTFE/002

 PTFE LID
For above Beakers plain type 1.5 mm to 2mm thick.. 
Capacity (in ml) : - 25, 50, 100, 150, 200, 250, 300, 400, 500, 1000, 2000, 3000, 5000, 10000 ml.

Item Code : - GSGI/PTFE/003                     

PTFE VESSEL or JARS with SCREW CAP
MADE OF PTFE. Handle severe corrosive liquids, concentrated acids, Solvents and sensitive reagents. Rigid walls, seamless, knurled cap, stackable inner, secondary seals, rediused inside corners. 
Capacity (in ml) : - 50, 100, 250, 500, 1000, 2000, 5000 ml.

Item Code : - GSGI/PTFE/004           

PTFE BOTTLE Narrow Mouth with Screw Cap
MADE OF PTFE. For storing the most corrosive chemicals or solvents... Inert... heat and cold resistant .... easily. Cleaned and we can also supply in bigger capacity.
Capacity (in ml) : - 25, 50, 100, 250, 500, 1000, 2000 ml.

Item Code : - GSGI/PTFE/005               

PTFE BOTTLE Wide Mouth with Screw Cap
MADE OF PTFE. For storing the most corrosive chemicals or solvents... Inert... heat and cold resistant .... easily. Cleaned and we can also supply in bigger capacity.
Capacity (in ml) : - 25, 50, 100, 250, 500, 1000, 2000 ml.

Item Code : - GSGI/PTFE/006                                                             PTFE CRUCIBLE

PTFE Rigid Crucible can be used for sample testing. 
Capacity (in ml) : - 15, 25, 50, 80, 100 ml.

Item Code : - GSGI/PTFE/007                                                                         PTFE LID

PTFE Lid for above crucible. 
Capacity (in ml) : - 15, 25, 50, 80, 100 ml.

Item Code : - GSGI/PTFE/008                                    PTFE MAGNETIC STIRRER BAR

MADE OF PTFE. Magnetic Stirrer Bars : PTFE Coated stirring leakproof polished seamless bars / rotors / paddles with center ring for use with magnetic stirrers contain a permanent alnico V magnet with center ring. 
Dia x Len : - 6x12, 7x15, 9x20, 9x 25, 9x30, 9x35, 9x40, 9x50, 9x75, 13x35, 13x50, 13x75, 13x100. Please Note : Twin mount block type oval shape, Plain without center rings, octagon, Umbel shape can also be supplied.

Item Code : - GSGI/PTFE/009           PTFE POLICEMAN (or MAGNETIC-RETRIVER)

MADE OF PTFE. Magnetic stirring bar Retirivers / policeman / cylindrical permanent magnet sealed at the end for removal or insertion of bars. 
Size : - 12x300 ml, 12x400ml.

Item Code : - GSGI/PTFE/010                                                  PTFE STIRRER GUIDES

MADE OF PTFE. Stuffing box gland cone with cap having shaft dia from 6 to 19 mm . 
Size  : - B19, B24, B29, B34, B40, B45, B50, B55.

Item Code : - GSGI/PTFE/011                                                  PTFE STIRRER GUIDES

.... without bearing rotating on bushes MADE OF PTFE. Stuffing box gland with PTFE pully without bearing rotation on bushes all PTFE.. 
Size  : - B19, B24, B29, B34, B40, B45, B50, B55.

Item Code : - GSGI/PTFE/012                                                  PTFE STIRRER GUIDES

.... (Stuffing box with Brass Pulley or SS Pulley ) MADE OF PTFE. Stuffing box gland with brass pulley rotation is achieved by coupling to a geared motor or via drive pulley (specify shaft dia) . 
Size  : - B24, B29, B34, B40, B45, B50, B55.

Item Code : - GSGI/PTFE/013              PTFE STUFFING BOX WITH STIRRER GUIDE

MADE OF PTFE. (specify shaft dia) . 
Size  : - B19, B24, B29, B34, B40, B45, B50, B55.

Item Code : - GSGI/PTFE/014                                                    PTFE MERCURY SEAL

MADE OF PTFE. Sealing with Mercury or Liquid Paraffin (specify shaft dia) . 
Size  : - B19, B24, B29, B34, B40, B45, B50, B55.

Item Code : - GSGI/PTFE/015                           PTFE STIRRER PLAIN with S.S. ROD

MADE OF PTFE. PTFE ROD contains a fully encapsulated steel insert for increased stiffness. It can be shaped to different configurations for use as a powered Stirrer unbreakable ... non contaminating ... non scratching. 
Dia x Len : - 8x200, 10x250, 12x300.

Item Code : - GSGI/PTFE/016                                            PTFE STIRRER ROD PLAIN

MADE OF PTFE. 
Dia x Len : - 8x200, 10x250, 12x300.

Item Code : - GSGI/PTFE/017                                      PTFE THERMOMETER POCKET

MADE OF PTFE. Small, Big or any length required. 
Size : - B14, B19, B24.

Item Code : - GSGI/PTFE/018                                                      PTFE WATCH GLASS

MADE OF PTFE. This can also be used as a Beakers lid. 
Dia x Thick : - 50x1.5, 60x1.5, 75x1.5, 85x1.5, 100x2, 125x2, 150x2.

Item Code : - GSGI/PTFE/019                                      PTFE HEXAGONAL STOPPERS

MADE OF PTFE. Out last and out perform conventional ground glass stoppers unaffected by corrosive chemicals needs no Lubrication, unbreakable replaces joint Glass stoppers, and glass flask stoppers. 
Size  : - B10, B14, B19, B24, B29, B34, B40, B45, B50, B55.

Item Code : - GSGI/PTFE/020                    PTFE HOMOGENIZERS (Tissue Grinder)

..... With S.S. or glass body with PTFE body. MADE OF PTFE. Tissue Grinders - PTFE vessels homogenizers consists of piston type PTFE  vessel with stainless steel shaft and replaceable grinding vessel of Borosilicate glass. The pastie is either.
Size (in ml)  : - 5, 10, 20, 30, 50, 100 ml.

Item Code : -GSGI/PTFE/021                 PTFE PLAIN TEST TUBE WITH ROUND AND FLAT BOTTOM

PTFE Plain test tube with Round and flat bottom. MADE OF PTFE. 
Capacity (in ml) : - 5, 10, 15, 20, 25, 50, 100 ml.

Item Code : - GSGI/PTFE/022             PTFE TEST TUBE WITH SCREW CAP ROUND

PTFE test tube with screw cap round and flat bottom with insert constructed Neck. MADE OF PTFE.
Capacity (in ml) : - 5, 10, 15, 20, 25, 50, 100 ml.

Item Code : - GSGI/PTFE/023                                                            PTFE TEST TUBE 

PTFE test tube with interchange stopper round and flat bottom. MADE OF PTFE. 
Capacity (in ml) : - 5, 10, 15, 20, 25, 50, 100 ml.

Item Code : - GSGI/PTFE/024                                   PTFE PLAIN CENTRIFUGE TUBE

PTFE plain centrifuge tube Round and conical shape. MADE OF PTFE. 
Capacity (in ml) : - 5, 10, 15, 20, 25, 50, 100 ml.

Item Code : - GSGI/PTFE/025                                               PTFE CENTRIFUGE TUBE

PTFE Centrifuge Tube round and conical shape with screw cap a constructed neck extra insert. MADE OF PTFE. 
Capacity (in ml) : - 5, 10, 15, 20, 25, 50 ml.

Item Code : - GSGI/PTFE/026                                               PTFE CENTRIFUGE TUBE

PTFE CENTRIFUGE TUBE WITH INTERCHANGEABLE STOPPER. MADE OF PTFE. 
Capacity (in ml) : - 5, 10, 15, 20, 25, 50, 100 ml.

Item Code : - GSGI/PTFE/027                     PTFE TEST TUBE OR CENTRIFUGE RACK

PTFE test tube or centrifuge rack is suitable for deep freezing in liquid Nitrogen for higher temperature in ovens. 
Diameter of tube No. of tube Len x Width x Ht.
16 mm 21 180x180x60
20 mm 10  180x60x70
30 mm 6 180x60x80
40 mm 4 180x60x80

Item Code : - GSGI/PTFE/028                                                                    PTFE VIALS 

CONICAL AND FLAT BOTTOM with tight fit cap or screw cap. MADE OF PTFE. Suitable for handling all sample requirements stockable ability to handle all corrosive media.
Capacity (in ml) : - 5, 10, 15, 20, 25, 50, 100 ml.

Item Code : - GSGI/PTFE/029                                                           PTFE VIAL RACK 

MADE OF PTFE. (ask for cap/sizes)
Len x Width x Thickness : - 150 x 80 x 40.

Item Code : - GSGI/PTFE/030                                      PTFE EVAPORATING DISHES 

MADE OF PTFE. Broad pouring spout flat bottom unbreakable chemical inert heat and cold resistant non contaminating, easy to clean. Will not absorb chemical or odours. Will not crack or deteriorate with age.
OD x HT : - 80x45, 105x55, 150x80, 200x100.

Item Code : - GSGI/PTFE/031                                     PTFE DISHES CRYSTALLIZING

MADE OF PTFE. Broad pouring spout flat bottom unbreakable. Chemical inert heat and cold resistant non contaminating. Easy to clean.Will not absorb chemical or odours. Will not crack or deteriorate with age.
OD x HT : - 100x50, 150x75, 190x100.

Item Code : - GSGI/PTFE/032                    PTFE DISHES ASSAY or CULTURE PETRI

MADE OF PTFE. Accuracy of many biological assays depends on the flatness of the inside bottom of petri dishes used. This dished has an inner bottom held to close flatness tolerances clear dishes with stand repeated sterilization (wet or dry ) 
OD x HT : - 50x17, 80x17, 100x17, 150x17, 200x17

Item Code : - GSGI/PTFE/033                          PTFE TRAY DRYING (HEAVY WALL) 

These trays will withstand hot air or steam sterilization use full paper chromatography too.
Len x Width x Thickness : - 250  x 150 x 50, 200 x100 x50, 150x150x40

Item Code : - GSGI/PTFE/034                PTFE GAS WASH BOTTLE with screw cap 

MADE OF PTFE. For rinsing with or dispensing virtually all Chemicals insert unbreakable and easy to clean.
Capacity (in ml) : - 100, 250, 500, 1000 ml.

Item Code : - GSGI/PTFE/035                                           PTFE DROPPING BOTTLES 

MADE OF PTFE.
Capacity (in ml) : - 25, 50 ml.

Item Code : - GSGI/PTFE/036                   PTFE CONICAL FLASK NARROW MOUTH 

MADE OF PTFE. For use with and dispensing of virtually all chemicals un breakable inert properties of PTFE facilitate easy of pouring due to non-stick, non absorption properties. 
Capacity (in ml) : - 25, 50, 100, 150, 200, 250, 500 ml.

Item Code : - GSGI/PTFE/037                         PTFE CONICAL FLASK WIDE MOUTH 

MADE OF PTFE. For use with and dispensing of virtually all chemicals un breakable inert properties of PTFE facilitate easy of pouring due to non-stick, non absorption properties.
Capacity (in ml) : - 25, 50, 100, 150, 200, 250, 500 ml.

Item Code : - GSGI/PTFE/038                  PTFE CONICAL FLASK WITH SCREW CAP

MADE OF PTFE.
Capacity (in ml) : - 25, 50, 100, 150, 200, 250, 500 ml.

Item Code : - GSGI/PTFE/039                                             PTFE DIGESTION VESSEL

MADE OF PTFE. For rapid preparation of small samples in an acid resistant contamination free vessel.
Capacity (in ml) : - 5, 10, 20 ml.

Item Code : - GSGI/PTFE/040                                       PTFE TRANSFER CONTAINER

MADE OF PTFE. For fluid transfer at low pressure upto 5psi containers have two 1/4" fitting with tubing .
Capacity (in ml) : -  250, 500 ml.

Item Code : - GSGI/PTFE/041                           PTFE TUBE OR SLEEVE THIN WALLS

PTFE TUBE OR SLEEVE THIN WALLS (IN LENGTH OF 3 TO 8 METERS ) MADE OF PTFE.
ODxIDxWT (mm) :- 3.2x1.6x0.8, 4.8x3.2x0.8, 6.4x4.8x0.8, 8.0x6.4x0.8, 9.5x7.9x0.8, 11.1x9.5x0.8, 12.7x11.1x0.8, 14.3x12.7x0.8

Item Code : - GSGI/PTFE/042                      PTFE TUBE OR SLEEVE HEAVY  WALLS

PTFE TUBE OR SLEEVE HEAVY  WALLS (IN LENGTH OF 3 TO 8 METERS ) MADE OF PTFE. *marked 2 item in length upto 3 mtr
ODxIDxWT (mm) :- 6.35x3.2x1.5, 8.0x4.8x1.5, 9.5x6.35x1.5, 11.1x8.0x1.5, 12.5x9.5x1.5, 16.0x12.5x1.5, 19.0x16.0x1.5, 22.2x19.0x1.5, 25.0x22.0x1.5, 28.0x25.05x1.5

TOLERANCE : First 5 items :- +/- 0.3 mm on OD, ID and wall.
THICKNESS : Last 5 items :- +/- 0.5 mm on OD, ID   +/- 0.3 mm on Wall Thickness.

Item Code : - GSGI/PTFE/043                                         PTFE REDUCTION ADAPTOR

MADE OF PTFE. Made for joining standard joints different sizes use in place of glass adapters eliminate, freezing and breaking no grease required, easy to insert and remove.
FEMALE SOCKET X MALE CONE : - B14xB19, B19xB24, B24xB34, B34xB55

Item Code : - GSGI/PTFE/044                                         PTFE EXPANSION ADAPTOR

MADE OF PTFE.
FEMALE SOCKET X MALE CONE : - B14xB19, B19xB24, B24xB34, B34xB55

Item Code : - GSGI/PTFE/045                             PTFE GAS INLET OR OUTLET TUBE

PTFE GAS INLET OR OUTLET TUBE (CONE WITH BENT) MADE OF PTFE.
SIZE : - B14, B19, B24, B34, B55

Item Code : - GSGI/PTFE/046                                   PTFE SOLID SPHERICAL BALLS

MADE OF PTFE. Completely inert to liquids and Vabours for column paching mixing beads or to prevent bumping in boiling can use in non return valve and vaccum pump.
DIA (in mm) :- 6,8,10,12,15,19,20,25,32,35,38,40,45,50 mm

Item Code : - GSGI/PTFE/047                                                    PTFE RAISING RINGS

MADE OF PTFE. Packing to distillation columns scrubbers completely inert-high surface area per unit of volume minimum resistance to gas and liquid flow (supplying in any sizes ) .