Beakers moulded in Polypropylene have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spour.

Material :- Polypropylene

Item No.

Particulars (in ml)

GSGI/PL/11101

50

GSGI/PL/11102

100

GSGI/PL/11104

250

GSGI/PL/11105

500

GSGI/PL/11106

1000

GSGI/PL/11107

2000

Material :- Polypropylene

Item No.

Particulars (in ml)

GSGI/PL/11110

25

GSGI/PL/11111

50

GSGI/PL/11112

100

GSGI/PL/11113

250

GSGI/PL/11114

500

GSGI/PL/11115

1000

GSGI/PL/11116

2000

GSGI/PL/11117

5000

Material :- TPX

GSGI/PL/11201

50

GSGI/PL/11202

100

GSGI/PL/11203

250

GSGI/PL/11204

500

GSGI/PL/11205

1000

This burette has a transparent acrylic body and a leakproof stopcock made fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give a maximum accuracy. Acrylic body is unaffected by dilute mineral acids and bases except Hydrofolic acid and Ammonium Hydroxide. The pH range from 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases.

Material :- Polymethyl Methacylate/TPX

Item No.

Particulars (in ml)

GSGI/PL/11501

25

GSGI/PL/11502

50

GSGI/PL/11503

100

GSGI presents a fast release pipetting device for precise pipetting and zip quick empyting. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be  pushed in for zip-quick empyting. The moduled chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids and alkalies and can be easily disassembled for thorough cleaning.

Material :- Acrylonitrile Butadine Styrene

Item No.

Particulars (in ml)

GSGI/PL/20001

2

GSGI/PL/20002

10

GSGI/PL/20003

25

Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense

small uniform drops of liquids when pressed lightly.

Material :- Low Density Polyethylene

Item No.

Particulars (in ml)

GSGI/PL/22101

60

GSGI/PL/22102

125

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and arc unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Material : Low Density Polyethylene and Polypropylene

Item No.

Item No.

Particulars (in ml)

GSGI/PL/33301

GSGI/PL/33401

60

GSGI/PL/33302

GSGI/PL/33402

125

GSGI/PL/33303

GSGI/PL/33403

250

GSGI/PL/33304

GSGI/PL/33404

500

GSGI/PL/33305

GSGI/PL/33405

1000

These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact c1aritc These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and arc unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Material : Low Density Polyethylene and  Polypropylene

Item No.

Item No.

Particulars (in ml)

GSGI/PL/33306

GSGI/PL/33406

60

GSGI/PL/33307

GSGI/PL/33407

125

GSGI/PL/33308

GSGI/PL/33408

250

GSGI/PL/33309

GSGI/PL/33409

500

GSGI/PL/33310

GSGI/PL/33410

1000

This autoclavable bottle, made of polypropylene,. can be used for storing & transferring chemicals and other reagents safe & sound.

Material : Polypropylene

Item No.

Particulars (in ml)

GSGI/PL/33501

4000

This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pout in & take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle.

Material Polypropylene

Item No.

Particulars (in ml)

GSGI/PL/33511

4000

This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vaccum.

Material Polypropylene

Item No.

Particulars (in ml)

GSGI/PL/33521

4000

GSGI Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable Carboys are provided with wide handles making it convenient while carrying or pouring purposes.

Material : Polypropylene

Item No.

Particulars (in ltrs.)

GSGI/PL/34001

10

GSGI/PL/34002

20

Adding in line of GSGI Aspirators, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.

Material Polypropylene

Item No.

Particulars (in ltrs.)

GSGI/PL/34051

10

GSGI/PL/34052

20

GSGI Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn, to opCn or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.

Material Polypropylene

Item No.

Particulars (in ltrs.)

GSGI/PL/34101

5

GSGI/PL/34102

10

GSGI/PL/34103

20

GSGI Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.

Material : Polyethylene

Item No.

Particulars (in ml.)

GSGI/PL/36601

125

GSGI/PL/36602

250

GSGI/PL/36603

500

GSGI/PL/36604

1000

These Bottles are also made of Low Density Polyethylene and are therefore translucent & unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.

Material: Polyethylene

Item No.

Particulars (in ml.)

GSGI/PL/36605

250

GSGI/PL/36606

500

GSGI/PL/36607

125

These wash bottles, made of polyethylene have wide mouth that enables easy filling as well as cleaning. The unique feature of the cap is through the top closure and stem moulded in one piece.

Material: Polyethylene

Item No.

Particulars (in ml.)

GSGI/PL/37101

500

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leak proof. Threads should be disengaged before autoclaving.

Material Polypropylene

Item No.

Particulars (in ml.)

GSGI/PL/38101

100

GSGI/PL/38102

250

GSGI/PL/38103

500

These transparent Specimen jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it. –

Material : Polystyrene

Item No.

Particulars

GSGI/PL/40001

50 mm X 200 mm

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping Two tapered wedges are provided to ensure firm grip on rods having dia ½” or 3/8” .

Material : Polypropylene

Item No.

Particulars

GSGI/PL/45101

Fisher Clamp Single

GSGI/PL/45102

Fisher Clamp Double

Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3” to 6”. The extra plate provided can be placed to hold funnels bearing dia 1” to 3”. Two tapered wedges are provided to ensure firm grip on Rods having dial /2” or 3/8”.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/45103

Funnel Holder

This non-Eorrosive Seperatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of seperating funnels. Two tapered wedges are provided to cnsurc firm grip on rods having dia 1/2’or 3/8.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/45104

Seperatory Funnel Holder

Moulded in Polypropylene, this Flask Stand gives a stair-like top view.

Every step provides excellent support to the round bottom flask at every

point of Contact. This Flask Stand can hold round bottom Flasks up to

10 Ltr. capacity This Stackable Flask Stand can also be steam autoclaved.

Material : Polystyrene

Item No.

Particulars

GSGI/PL/45103

Flask Stand

Made of polypropylene, these Connectors are basically pipe-like structures in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edged prevent leakage & Slippage.

Material :- Polypropylene

Item No.

Particulars

GSGI/PL/46001

T-Connectors 6mm

GSGI/PL/46002

Y-Connectors 6mm

GSGI/PL/46003

T-Connectors 8mm

GSGI/PL/46004

Y-Connectors 8mm

These connectors add to the existing range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leakproof grip to the tube.

Material Polypropylene

Item No.

Particulars

GSGI/PL/46111

T-Connectors 6mm

GSGI/PL/46112

Y-Connectors 6mm

GSGI/PL/46113

T-Connectors 8mm

GSGI/PL/46114

Y-Connectors 8mm

GSGI/PL/46115

T-Connectors 10mm

GSGI/PL/46116

Y-Connectors 10mm

These four way connectors prove to be an excellent option for achieving leakproof joints in tubing connections.

Material :- Polypropylene

Item No.

Particulars

GSGI/PL/46121

Cross Connector – 6mm

GSGI/PL/46122

Cross Connector – 8mm

GSGI/PL/46123

Cross Connector – 10mm

These L shaped connectors also add to the range of different connectors committed to provide excellent leakproof tube arrangements.

Material :- Polypropylene

Item No.

Particulars

GSGI/PL/46131

L Connector – 6mm

GSGI/PL/46132

L Connector – 8mm

GSGI/PL/46133

L Connector – 10mm

Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species.

Material :- Polypropylene / Stainless Steel

Item No.

Particulars

GSGI/PL/47001

290 X 220 X 140 mm

GSGI/PL/47002

430 X 270 X 150 mm

GSGI/PL/47003

Water Bottle – 125 ml

GSGI/PL/47004

Water Bottle – 250 ml

Adding in line with the existing range, these Animal Cages are provided with a Stainless Steel grill at the bottom of the cage to provide a dean surface for the species to move on.

Material :- Polypropylene / Stainless Steel

Item No.

Particulars

GSGI/PL/48001

290 X 220 X 140 mm

GSGI/PL/48002

430 X 270 X 150 mm

These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed mm the heavy base giving way to a perfectly stable Retort Stand.

Material : Polystyrene/Polypropylene

Item No.

Particulars

GSGI/PL/54101

225 X 150 mm – Side Hole

GSGI/PL/54102

300 X 200 mm – Centre Hole

GSGI/PL/54103

300 X 200 mm – Side Hole

GSGI Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vaccum desiccators can hold vaccum upto 740 mm of Fig for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knuiled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber 0- Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plugworks three way i.e. vaccum creation, shutting off & vaccum releasing.

Material: Polypropylene/Polycarbonate

Item No.

Size (mm)

Flange OD (mm)

ID (mm)

GSGI/PL/55204

150

171

150

GSGI/PL/55205

200

232

199

GSGI/PL/55206

250

276

240

GSGI/PL/55207

300

340

300

Plain Desiccators are physically the same as Vaccum Desiccatot Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

Material: Polypropylene/Polycarbonate

Item No.

Size (mm)

Flange OD (mm)

ID (mm)

GSGI/PL/55201

150

171

150

GSGI/PL/55202

200

232

199

GSGI/PL/55203

250

276

240

GSGI/PL/55208

300

340

300

Both Vaccurn & Plain Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in the disc provide air troughs & support to the dishes. However porcelain discs are advisable in case of incandescent crucibles.

These polypropylene Stop Cocks are fitted with a PTFE plug & have

serrated tubulations that accept from 6 mm to 10 mm tubing. These Stop Cocks ate absolutely leakproof and are available in two different options i.e. 2 way & 3 way.

Material Polypropylene / PTFE

Item No.

Particulars

GSGI/PL/55301

Stop Cock 2 Way

GSGI/PL/55302

Stop Cock 3 Way

GSGI Kipp’s Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. l-lS gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug The base is provided with a residual outlet fitted with a cap for easy cleaning.

Material :- Hjgh Density Polyethylene

Item No.

Particulars

GSGI/PL/55501

250 ml

GSGI/PL/55502

500 ml

GSGI/PL/55503

1000 ml

These long stem funnels have smooth waIls, 600 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.

Material :- Polypropylene

Item No.

Particulars (mm)

Inside

Stem Length

GSGI/PL/57101

50

50

39

GSGI/PL/57102

62

61

67

GSGI/PL/57103

75

74

69

GSGI/PL/57104

100

93

84

GSGI/PL/57107

150

148

55

Moulded in Polypropylene, these two piece funnels are lightweight, easy to clean & autoclavabic. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing The base of the top portion has a perforated filter plate.

Material :- Polpropylene

Item No.

Particulars

GSGI/PL/57105

70 mm

GSGI/PL/57106

110 mm

Designed specifically for analytical chemistry, the body of the funnels is 6O. Moulded in P1’, these funnels are provided with internal & external ribs to prevent air blockage.

MAterial :- Polpropylene

Item No.

Particulars (mm)

Inside

Stem Length

GSGI/PL/57200

50

50

50

GSGI/PL/57201

62

62

67

GSGI/PL/57202

75

75

77

GSGI/PL/57203

100

100

95

These Polypropylene Petri Dishes are clear, unbreakable & autoclavable.

Material :- Polypropylene

Item No.

Particulars (mm)

GSGI/PL/57301

50

GSGI/PL/57302

75

GSGI/PL/57303

100

GSGI/PL/57304

125

GSGI/PL/57305

150

Newly added PS Petri Dish with fitting proves excellent for culture exp. Made in polystyrene, this transparent Petri Dish provides excellent inside view.

Material :- Polystyrene

Item No.

Particulars

GSGI/PL/57501

Petri dish

These sets consist of moulded balls of different colours and sizes along with connecting tugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds.

SENIOR SET This set consists of 185 hugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball.

JUNIOR SET This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.

Material : Polystyrene

Item No.

Particulars

GSGI/PL/58001

Senior Set

GSGI/PL/58002

Junior Set

This set consists of moulded balls of different cotours & sizes along with connectors of different sizes. The sizes & shapes of the halts & connecting lugs have been designed in accordance with internationally acceptable standards.

Material : Polystyrene

Item No.

Particulars

GSGI/PL/58011

Student Set

GSGI/PL/58012

Teacher Set

These Crystal Model Sets contain different coloured jacks (Red, Bladk& White) & connectors Qong & short) in a prescribed number to be joined together in an illustrated way to form structures llke Diamond, Graphite & Sodium Chloride.

Material : Polyethylene

Item No.

Particulars

GSGI/PL/58101

Diamond

GSGI/PL/58102

Sodium Chloride

GSGI/PL/58103

Graphite

GSGI Coplinjar made of Polypropylene can h0ld 10 slides of the size 1 “x3” back to back. The interior of the Coplin jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

Material: Polypropylene

Item No.

Particulars

GSGI/PL/62101

Coplin Jar

Slide Mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in three sizes i.e. 1,2 & 5 slides.

Material: Polypropylene

Item No.

Particulars (mm)

GSGI/PL/62100

1 slide

GSGI/PL/62102

2 slides

GSGI/PL/62103

3 slides

These Slide Boxes are durable, compact & provide utmost protection to 1 “x3” slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the

Material : Polystyrene

Item No.

Particulars (mm)

GSGI/PL/62104

25 slides

GSGI/PL/62105

50 slides

GSGI/PL/62106

100 slides

Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spading between the slots provide adequate backward & forward movement of slides for convenient recognition. The transparent cover provide excellent view of the slides stored inside.

Material : Acrylonitrile Butadiene Styrene

Item No.

Particulars (mm)

GSGI/PL/62501

100 slides

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/63201

16 MCTs OF 15 ml

GSGI provides this Twin Purpose Rack for both 0.5 ml. & 1.5 ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCT’s, respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.

Material Polypropylene

Item No.

Particulars

GSGI/PL/63211

Rack for 05 ml and 15 ml MCTS

This rack, as the name suggests, is used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no. of racks can be stacked together to save shelf space.

Material Polycarbonate /Polypropylene

Item No.

Particulars

GSGI/PL/63212

Rack for 96 PCR Tubes of 0.2 ml

MCT Boxes are moulded in polycarbonate and are therefore strong as ‘veil as autoclavable. One size can hold 64 MCTs of 1.5 ml. & the other can hold 100 MCT’s of 0.5 ml.. These boxes are designed to work at temperatures ranging from -190°C to +121°C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.

Material Polycarbonate

Item No.

Particulars

GSGI/PL/63213

Rack for 100 MCTs of 0.5 ml

GSGI/PL/63214

Rack for 64 MCTs of 1.5 ml

GSGI Centrifuge tubes with conical bottom are available in two sizes i.e. 15 ml. & 50 ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These robes can withstand forces upto 7500xG & l2000xG for 15 ml. & 50 ml. tubes respectively These tubes are available sterillzed as well as non-sterilized.

Material Polypropylene

Item No.

Particulars

GSGI/PL/63301

15 ml

GSGI/PL/63302

50 ml

GSGI/PL/63311

15 ml Sterile

GSGI/PL/63312

50 ml Sterile

GSGI Centrifuge Tubes with round bottom are moulded in

Polypropylene & Polycarhonate These tubes have excellent clarity and are

strong enough to be used upto 50,000xG. These tubes can be autoclaved,

however, repeated autoclaving in PC tubes reduces their mechanical

Material Polropytene /Polycarbonate

Item No.

Particulars

GSGI/PL/63401

16 ml Cent. Tube PP

GSGI/PL/63402

50 ml Cent. Tube PP

GSGI/PL/63411

16 ml Cent. Tube PC

GSGI/PL/63412

50 ml Cent. Tube PC

GSGI/PL/63421

Cap. For 16 ml. Cent. Tube

GSGI/PL/63422

Cap. For 50 ml. Cent. Tube

Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can he used upto 50,000xG. The screw cap is fitted with silicon 0-Ring maldngit totally leakproof. These tubes should not he used below 4UC.

Material Polypropylene

Item No.

Particulars

GSGI/PL/63501

16 ml Cent. Tube PP

GSGI/PL/63502

50 ml Cent. Tube PP

GSGI/PL/63503

16 ml Cent. Tube PC

These containers can be used for collecting a wide range of samples of sputum, urine etc.. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof.

Material Polypropylene

Item No.

Particulars

GSGI/PL/63701

30 ml

GSGI/PL/63702

60 ml

These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.

Material Polypropylene

Item No.

Particulars

GSGI/PL/63801

30 ml

GSGI/PL/63802

60 ml

In addition to the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination.

Material Polypropylene

Item No.

Particulars

GSGI/PL/63901

25 ml

These Polypropylene/Polystyrene tubes are generally used in MA, Coagulation & Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCE The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents.

Material Polypropylene /Po1ystyrene

Item No.

Particulars

GSGI/PL/64001

12 x 75 mm / PS

GSGI/PL/64002

12 x 75 mm / PP

GSGI/PL/64003

Cap for 12 mm RIA Tube

These polypropylene vials are unique because the cap fitted with an 0- ring can be screwed into the vial making it a leak proof vial which can be used in RIA, Coagulation & Bacteriology etc.

Material Polypropylene

Item No.

Particulars

GSGI/PL/64015

12 x 75 mm Int. Thread

These polypropylene tubes provide excellent aption for MA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim.

Material Polypropylene

Item No.

Particulars

GSGI/PL/64016

16 x 100 mm Ext. Thread

This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube white the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.

Material Polypropylene

Item No.

Particulars

GSGI/PL/64021

Cap for test tube 25 mm

As the name suggests, these vials are commonly u ed for storage of biological material, human & animal cells at temperature as low as

-190°C. The Cap is provided with a built in seal ring making the vial leak proof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.

Material Polypropylene /Po1ystyrene

Item No.

Particulars

GSGI/PL/64101

1.0 ml

GSGI/PL/64102

2.0 ml

GSGI/PL/64103

5.0 ml

This vial has an 0-ring in the cap that makes it absolutely leak proof.

Like other storage vials this vial can also be used for storage purposes at

temperatures as low as -190°C.

Material Polypropylene

Item No.

Particulars

GSGI/PL/64111

2.0 ml

Another addition to the range of storage vials is this vial which has internal thread in it. The cap fitted with an 0-ring screws in to the vial

and makes it a leakproof storage vial.

Material Polypropylene

Item No.

Particulars

GSGI/PL/64115

2.0 ml

These polypropylene vials add to the existing range of GSGI storage

vials. Available in 5 ml. & 10 ml. capacities, these vials have

polypropylene cap with built in seal ring making it a leakproof vial. Just

like others storage vials these vials ate also used for the storage of

biological material, animal & human cells etc.

Material Polypropylene

Item No.

Particulars

GSGI/PL/64201

SV-10 ml

GSGI/PL/64202

SV-5 ml

These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

Material Polypropylene

Item No.

Particulars

GSGI/PL/65001

8 ml

GSGI/PL/65002

20 ml

These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both S nil. & 20 nil, vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.

Material Polypropylene

Item No.

Particulars

GSGI/PL/65101

Rack for 90 vials of 8 ml capacity

GSGI/PL/65102

Rack for 90 vials of 20 ml capacity

Adding to the existing range of Cryo Vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long marking area for sample identification.

Material Polypropylene

Item No.

Particulars

GSGI/PL/65501

2.0 ml

Cryo vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190°C. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leak proof. The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.

Material Polypropylene

Item No.

Particulars

GSGI/PL/66001

1.0 ml

GSGI/PL/66002

1.8 ml

GSGI/PL/66003

4.5 ml

These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.

Material : Polystyrene

Item No.

Particulars

GSGI/PL/66101

Cyro Coders

GSGI Cryo Rack is moulded in Polycarbonate making it tough,

durable & autoclavable. This handy rack can hold 50 vials at a time. The

unique feature of this rack is that vials can be unscrewed without

actually picking them up as the vial will lock in every well and hence will

not twist. This tack is provided with four and skid rubbers & each well is

identified with an alpha-numeric index.

MEterial : Polycarbonate

Item No.

Particulars

GSGI/PL/66201

50 places for 1, 1.8 and 4.5 ml Cryo Vials

Polylab Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accommodate Cryo Vials of up to 4.5 nil, capacity and are designed to be used at temperatures ranging from -190°C to
+121°C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.

Material: Polycarbonate

Item No.

Particulars

GSGI/PL/66301

81 places for 1 ml or 1.8 ml Cryo Vials

GSGI/PL/66302

81 places for 4.5 ml Cryo Vials

GSGI/PL/66303

100 places for 1 ml or 1.8 ml Cryo Vials

Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2m1. capacity Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/66501

81 places for 1 ml or 1.8 ml Cryo Vials

GSGI/PL/66502

100 places for 1 ml or 1.8 ml Cryo Vials

Polylab ELISA/ASSAY plates are made of optically clear, non-toxic Polystyrene. These plates with 96 U Bottom or flat bottom wells bear alphanumeric index. Uniform placement of all the wells facilitates use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.

Material :Polystyrene

Item No.

Particulars

GSGI/PL/66801

Flat Bottom Elisa Plate

GSGI/PL/66802

U Bottom Elisa Plate

GSGI/PL/66803

Flat Bottom Assay Plate

GSGI/PL/66804

U Bottom Assay Plate

GSGI/PL/66901

Flat Bottom Elisa Plate - Sterile

GSGI/PL/66902

U Bottom Elisa Plate – Sterile

GSGI/PL/66903

Flat Bottom Assay Plate – Sterile

GSGI/PL/66904

U Bottom Assay Plate – Sterile

These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is dear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

Material: Polypropylene

Item No.

Particulars

GSGI/PL/67001

For 96 Micro Tips of 2-200

GSGI/PL/67002

For 100 Micro Tips of 200-1000

The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box.

Material: Polypropylene

Item No.

Particulars

GSGI/PL/67011

For 96 Micro Tips of 2-10

GSGI/PL/67012

For 96 Micro Tips of 2-200

GSGI/PL/67013

For 100 Micro Tips of 200-1000

GSGI Volumetric Flasks, blown in Polypropylene, are strong, unbreakablc and have good contact clarity These autoclavable flasks are provided with screw caps to prevent leakage.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/68001

25 ml

GSGI/PL/68002

50 ml

GSGI/PL/68003

100 ml

GSGI/PL/68004

250 ml

GSGI/PL/68005

500 ml

GSGI/PL/68006

1000 ml

These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Pen-i Dishes packed individually in polyethylene bags are sterilized by radiation.

Material : Polystyrene

Item No.

Particulars

GSGI/PL/69001

90 mm Radiation Stz

GSGI/PL/69002

60 mm Radiation Stz

GSGI/PL/69003

35 mm Radiation Stz

These Racks are clear acrylic construction with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation.

Material Polymethyl Metacrylate /Polycarbonate

Item No.

Particulars

GSGI/PL/69101

Rack for 90 mm Petri Dishes

GSGI/PL/69102

Rack for 60 mm Petri Dishes

This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this rack can be used for tubes of 30mm, 20mm, 17mm and l2mm.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/76001

Multi Rack

This stand, as the name suggests, is used for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for SOml nestler cylinder & other for lOOmL nestler cylinder.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/76101

50 ml

GSGI/PL/76102

100 ml

This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/77701

16 mm and 25 mm tubes

GSGI/PL/77702

25 mm tubes

A handy, little, space saver, this circular twelve place Polypropylene Test

Tube Stand has four 25mm Wa holes & eight 19mm Wa holes in its top

plate. The base has matching hemispherical wells & 16 vertical pins for

drying tubes surrounded by a trough to catch drippings. This

autoclavable rack can be easily disassembled for cleaning purpose.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/77704

19 mm and 25 mm tubes

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.

Material : Polycarbonate

Item No.

Particulars

GSGI/PL/77705

24 Tubes

GSGI/PL/77705 A

48 Tubes

These igneious racks with a 3-tier design provide dear view of the tube contents & convenient insertion & removal of tuber The PC nick has transparent upper & middle plates where as in PP nicks, every part is coloured & opaque. These autoclavable Racks can withstand sub-freezing temperature.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/77706

13 mm x 31 Tubes

GSGI/PL/77707

16 mm x 31 Tubes

GSGI/PL/77708

20 mm x 21 Tubes

GSGI/PL/77709

25 mm x 12 Tubes

GSGI/PL/77710

25 mm x 18 Tubes

GSGI/PL/77711

32 mm x 12 Tubes

GSGI/PL/77712

25 mm x 36 Tubes

GSGI/PL/77714

13 mm x 18 Tubes

GSGI/PL/77715

15 mm x 18 Tubes

GSGI/PL/77716

18 mm x 12 Tubes

GSGI/PL/77717

13 mm x 62 Tubes

GSGI/PL/77718

16 mm x 62 Tubes

GSGI/PL/77719

20 mm x 40 Tubes

GSGI/PL/77720

13 mm x 48 Tubes

GSGI/PL/77721

13 mm x 72 Tubes

Material : Polycarbonate

Item No.

Particulars

GSGI/PL/77801

13 mm x 31 Tubes

GSGI/PL/77802

16 mm x 31 Tubes

GSGI/PL/77803

20 mm x 20 Tubes

GSGI/PL/77804

25 mm x 12 Tubes

GSGI/PL/77805

13 mm x 62 Tubes

GSGI/PL/77806

16 mm x 62 Tubes

GSGI/PL/77807

20 mm x 40 Tubes

GSGI/PL/77808

25 mm x 24 Tubes

GSGI/PL/77809

25 mm x 18 Tubes

GSGI/PL/77810

25 mm x 36 Tubes

GSGI/PL/77811

32 mm x 12 Tubes

An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/77901

31 mm x 90 Tubes

GSGI/PL/77902

16 mm x 60 Tubes

GSGI/PL/77903

20 mm x 40 Tubes

GSGI/PL/77904

25 mm x 24 Tubes

These two-tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks are provided with alpha numeric index for easy sample identification. Racks are stack able even when loaded and have purpose designed label spaces on each side.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/77910

100 Places for 1.5 ml MCTs

GSGI Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and noncorrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/78101

140 x 120 x 110 mm

GSGI/PL/78102

160 x 160 x 160 mm

As the name suggests, this basket with wide net like structure on all sides prove really useful for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatediy auto claved.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/78103

400 x 400 x 100 mm

This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79101

For 12 Pipettes

This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79102

For 28 Pipettes

Moulded in Polypropylene, this unique Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79103

For 94 Pipettes

Made of polypropylene, this Pipette Box is designed is such a way that it can hold Pipettes of different lengths. The top of the box screws on the bottom and the height can be adiusted by screwing or unscrewing the top.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79111

Pipette box

Moulded in Polypropylene, this autoclavable Reagent Reservoir is helpful for multi-channel pipettes to be used into microtiter plates.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79121

75 ml

This Universal Reagent Reservoir is a graduated single reagent reservoir with maximum volume of 50m1, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5ml. reagent channels. Made of polypropylene these reagent reservoirs are repeatedly autoclavable and can he used with all multi-channel pipettes.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79121

75 ml

This ice Bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.

Material Polyurethane

Item No.

Particulars

GSGI/PL/79201

Ice Bucket

Moulded in Polypropylene, this Staining Box helps in staining, fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist temperatures from -70°C to +70°C. The LDPE plug provides leakproof seal and allows easy liquid drainage.

Material : Polypropylene

Item No.

Particulars

GSGI/PL/79301